-
About Huafu
-
-
PRODUCT INTRODUCTION
A mobile electric ignition system comprises a central electric heater connected to the lower part of an equal-diameter coiled tubing sheathed cable. A coiled tubing conveyed igniter is lowered to the target layer in the wellbore to heat the perforated interval by using coiled tubing operation equipment, so that temperature of the near-wellbore zone of the well section rise to over the spontaneous combustion point of the combustible medium in the oil layer.
- FEATURES & BENEFITS
- HOW IT WORKS
- TECHNICAL INFORMATION
-
- Commodity name: Mobile electric ignition system and operation equipment
- Commodity ID: z102
- 副标题: PRODUCT INTRODUCTION
A mobile electric ignition system comprises a central electric heater connected to the lower part of an equal-diameter coiled tubing sheathed cable. A coiled tubing conveyed igniter is lowered to the target layer in the wellbore to heat the perforated interval by using coiled tubing operation equipment, so that temperature of the near-wellbore zone of the well section rise to over the spontaneous combustion point of the combustible medium in the oil layer.
FEATURES & BENEFITS
1. Max. running depth of igniter: 2,350 m
2. Heating power of igniter: 120 kW
3. Wellhead pressure: 45MPa
4. Max. drift diameter at wellhead: 62 mm
-
HOW IT WORKS
A mobile electric ignition system comprises a central electric heater connected to the lower part of an equal-diameter coiled tubing sheathed cable. A coiled tubing conveyed igniter is lowered to the target layer in the wellbore to heat the perforated interval by using coiled tubing operation equipment, so that temperature of the near-wellbore zone of the well section rise to over the spontaneous combustion point of the combustible medium in the oil layer. At the same time, downhole temperature is transmitted to the surface power supply control cabinet through thermocouples and measuring conductors for direct reading . When the oil well is under positive pressure and in a sealed state after the formation is completely ignited, the igniter conveyed by coiled tubing is pulled out.
-
TECHNICAL INFORMATION
A mobile electric ignition system comprises the following 4 parts:
- Surface power supply control and display;
- Downhole igniter consisting of an electric igniter connected to a 2-phase power supply cable inside coiled tubing;
- Downhole coiled tubing conveyed temperature and pressure measuring system;
- Coiled tubing operation equipment and tools
RELATED PRODUCTS
Electric heating technology to remove paraffin and reduce the viscosity of oil is to run heating cable (coiled tubing sheathed cable or rubber insulated cable) into the tubing or hollow sucker rod (with a hollow section at the upper part). The system is powered from the surface. Under the effects of skin effect and proximity, the coiled tubing sheathed cable or hollow sucker rod becomes heated to improve the temperatures of fluid flow and wellbore equipment. For a well having the problem of precipitated paraffin, the paraffin can be melted by heating, and then removed and controlled. Thus, oil heating and paraffin removal and control are realized in the process of lifting. Depending on the situation of paraffin precipitation in wellbore and the change in oil production, timing for powering up cable to remove paraffin can be selected. Meanwhile, the recovery of production is observed to determined the paraffin removal effect. Running of the electric heating system shall be stopped immediately after the expected effect is achieved. In this way, continuous or intermittent paraffin removal is realized. For a heavy oil well, heating reduces the viscosity of heavy oil to improve its fluidity, realizing the purpose of continuous production. This technology is widely applicable to various rod wells, rodless wells or flowing wells.
VIEW ALL PRODUCTS
Pipeline SECT (heating) technology is a new metal pipeline heating method that appeared in the middle of the last century. It is a new technology and process for the heating and thermal insulation of heated transmission pipelines of large petrochemical enterprises, which is suitable for the heat tracing and heating of all long, medium and short distance metal liquid transmission pipelines, featuring high efficiency, safety, high reliability, and convenient installation and maintenance. Therefore, it is widely used in the pipeline transportation of various liquids with different properties.
VIEW ALL PRODUCTS
Coiled tubing sheathed heating cable
After an oxygen-free copper rod is drawn and straightened, insulating and packing layers are mechanically wound, which is then subjected to sintering in an electric furnace to make the insulating layer integrated. After being pulled through a tubing, welded and drawn, the cable is made. The cable section is shown in the lower right figure. Because steel tubing is used as the sheath, the easily damaged surface is completely protected.
VIEW ALL PRODUCTSPARTS & SERVICES
Huafu offers its customers a complete life cycle support for its products, equipment and solutions.
LEARN MORE
-
We are your water treatment partner,
enhancing the value of water through innovation, -
creativity and expertise.
Huafu
About Group
enterprise